:: Volume 8, Issue 1 (9-2019) ::
ieijqp 2019, 8(1): 93-102 Back to browse issues page
A review of the effect of dust on the performance of photovoltaic panels
Aslan Gholami1 , Shahab Eslami1 , Aryan Tajik1 , Mohammad Ameri1 , Roghayeh Gavagsaz Ghoachani1 , Majid Zandi * 1
1- Faculty of Mechanical and Energy Engineering, Shahid Beheshti University
Abstract:   (4549 Views)
In recent years, the utilization of clean renewable energies, especially solar energy, have increased dramatically due to their advantages over fossil fuels. Installation of photovoltaic systems is one of the most common methods of solar energy harvesting. The performance of these systems in converting solar energy to electricity is extensively a function of environmental conditions such as solar radiation, ambient temperature, wind, humidity, and other environmental parameters. Therefore, any changes in these parameters have a great influence on the design and performance evaluation of photovoltaic systems. Many regions with high solar potential for installation of photovoltaic panels are arid and deserted areas, in which the dust activities would significantly affect the performance of photovoltaic panels. This problem is much more serious in the climate of Iran, which is repeatedly faced with dust activities as well as aerosol dispersion. Therefore, the present study conducted a comprehensive review of the related literature in the field of the effect of dust on the performance and efficiency of solar panels. The results of the current study can serve as a thorough reference for researchers, designers, and engineers who deal with photovoltaic systems in regions struggling with dust events such as the Middle East, and in particular, Iran.
Keywords: Dust, Photovoltaic Panel, Wind, Mounting Angle, Humidity.
Full-Text [PDF 1062 kb]   (1528 Downloads)    
Type of Study: Research |
Received: 2018/12/27 | Accepted: 2019/03/4 | Published: 2019/09/1
References
1. [1] A. A. Salim, F. S. Huraib, and N. N. Eugenio, "PV power-study of system options and optimization," in EC photovoltaic solar conference. 8, 1988, pp. 688-692.
2. [2] A. H. Hassan, U. A. Rahoma, H. K. Elminir, and A. M. Fathy, "Effect of airborne dust concentration on the performance of PV modules," J. Astron. Soc. Egypt, vol. 13, no. 1, pp. 24-38, 2005.
3. [3] H. P. Garg, "Effect of dirt on transparent covers in flat-plate solar energy collectors," Sol. Energy, vol. 15, no. 4, pp. 299-302, 1974. [DOI:10.1016/0038-092X(74)90019-X]
4. [4] A. Sayigh, S. Al-Jandal, and H. Ahmed, "Dust effect on solar flat surfaces devices in Kuwait," in Proceedings of the workshop on the physics of non-conventional energy sources and materials science for energy, 1985, pp. 2-20.
5. [5] M. S. El-Shobokshy and F. M. Hussein, "Effect of dust with different physical properties on the performance of photovoltaic cells," Sol. Energy, vol. 51, no. 6, pp. 505-511, Dec. 1993. [DOI:10.1016/0038-092X(93)90135-B]
6. [6] D. Goossens and E. Van Kerschaever, "Aeolian dust deposition on photovoltaic solar cells: the effects of wind velocity and airborne dust concentration on cell performance," Sol. Energy, vol. 66, no. 4, pp. 277-289, 1999. [DOI:10.1016/S0038-092X(99)00028-6]
7. [7] Z. I. Offer and D. Goossens, "Airborne dust in the Northern Negev Desert (January-December 1987): general occurrence and dust concentration measurements," J. Arid Environ., vol. 18, no. 1, pp. 1-19, Jan. 1990. [DOI:10.1016/S0140-1963(18)30865-6]
8. [8] H. Hottel and B. Woertz, "Performance of flat-plate solar-heat collectors," Trans. ASME (Am. Soc. Mech. Eng.);(United States), vol. 64, 1942.
9. [9] A. Zarem and D. Erway, "Introduction to the utilization of solar energy," 1963.
10. [10] J. J. Michalsky, R. Perez, R. Stewart, B. A. LeBaron, and L. Harrison, "Design and development of a rotating shadowband radiometer solar radiation/daylight network," Sol. Energy, vol. 41, no. 6, pp. 577-581, 1988. [DOI:10.1016/0038-092X(88)90060-6]
11. [11] T. R. B. and R. G. H. Qasem*, "EFFECT OF SHADING CAUSED BY DUST ON CADMIUM TELLURIDEnPHOTOVOLTAIC MODULEL," 2011.
12. [12] S. A. M. Said and H. M. Walwil, "Fundamental studies on dust fouling effects on PV module performance," Sol. Energy, vol. 107, pp. 328-337, Sep. 2014. [DOI:10.1016/j.solener.2014.05.048]
13. [13] R. Appels et al., "Effect of soiling on photovoltaic modules," Sol. Energy, vol. 96, pp. 283-291, Oct. 2013. [DOI:10.1016/j.solener.2013.07.017]
14. [14] R. Appels, B. Muthirayan, A. Beerten, R. Paesen, J. Driesen, and J. Poortmans, "The effect of dust deposition on photovoltaic modules," in 2012 38th IEEE Photovoltaic Specialists Conference, 2012, no. June, pp. 001886-001889. [DOI:10.1109/PVSC.2012.6317961]
15. [15] N. Bouaouadja, S. Bouzid, M. Hamidouche, C. Bousbaa, and M. Madjoubi, "Effects of sandblasting on the efficiencies of solar panels," Appl. Energy, vol. 65, no. 1-4, pp. 99-105, Apr. 2000. [DOI:10.1016/S0306-2619(99)00044-6]
16. [16] G. A. Mastekbayeva and S. Kumar, "Effect of dust on the transmittance of low density polyethylene glazing in a tropical climate," Sol. Energy, vol. 68, no. 2, pp. 135-141, Feb. 2000. [DOI:10.1016/S0038-092X(99)00069-9]
17. [17] S. L. O'Hara, M. L. Clarke, and M. S. Elatrash, "Field measurements of desert dust deposition in Libya," Atmos. Environ., vol. 40, no. 21, pp. 3881-3897, 2006. [DOI:10.1016/j.atmosenv.2006.02.020]
18. [18] A. O. Mohamed and A. Hasan, "Effect of dust accumulation on performance of photovoltaic solar modules in Sahara environment," J. Basic Appl. Sci. Res., vol. 2, no. 11, pp. 11030-11036, 2012.
19. [19] H. A. Kazem and M. T. Chaichan, "Experimental analysis of the effect of dust's physical properties on photovoltaic modules in Northern Oman," Sol. Energy, vol. 139, pp. 68-80, Dec. 2016. [DOI:10.1016/j.solener.2016.09.019]
20. [20] J. Wang, H. Gong, and Z. Zou, "Modeling of Dust Deposition Affecting Transmittance of PV Modules," J. Clean Energy Technol., vol. 5, no. 3, pp. 217-221, May 2017. [DOI:10.18178/JOCET.2017.5.3.372]
21. [21] M. S. El-Shobokshy, A. Mujahid, and A. K. M. Zakzouk, "Effects of dust on the performance of concentrator photovoltaic cells," IEE Proc. I Solid State Electron Devices, vol. 132, no. 1, p. 5, 1985. [DOI:10.1049/ip-i-1.1985.0002]
22. [22] B. S. Yilbas et al., "Characterization of Environmental Dust in the Dammam Area and Mud After-Effects on Bisphenol-A Polycarbonate Sheets," Sci. Rep., vol. 6, no. 1, p. 24308, Jul. 2016. [DOI:10.1038/srep24308]
23. [23] G. Hassan, B. S. Yilbas, S. A. M. Said, N. Al-Aqeeli, and A. Matin, "Chemo-Mechanical Characteristics of Mud Formed from Environmental Dust Particles in Humid Ambient Air," Sci. Rep., vol. 6, no. 1, p. 30253, Sep. 2016. [DOI:10.1038/srep30253]
24. [24] E. A. FitzPatrick and E. A. Fitzpatrick, Soil microscopy and micromorphology, vol. 158. John Wiley & Sons New York, 1993.
25. [25] H. Zhang, X. Li, C. Du, and H. Qi, "Corrosion behavior and mechanism of the automotive hot-dip galvanized steel with alkaline mud adhesion," Int. J. Miner. Metall. Mater., vol. 16, no. 4, pp. 414-421, Aug. 2009. [DOI:10.1016/S1674-4799(09)60073-X]
26. [26] Z. Jie, Z. Chuande, Z. Fuzhong, L. Shuhua, F. Miao, and T. Yike, "Experimental and numerical modeling of particle levitation and movement behavior on traveling-wave electric curtain for particle removal," Part. Sci. Technol., vol. 0, no. 0, pp. 1-9, Apr. 2018.
27. [27] B. S. Yilbas, G. Hassan, H. Ali, and N. Al-Aqeeli, "Environmental dust effects on aluminum surfaces in humid air ambient," Sci. Rep., vol. 7, no. 1, p. 45999, Dec. 2017. [DOI:10.1038/srep45999]
28. [28] B. S. Yilbas, H. Ali, M. M. Khaled, N. Al-Aqeeli, N. Abu-Dheir, and K. K. Varanasi, "Influence of dust and mud on the optical, chemical, and mechanical properties of a pv protective glass," Sci. Rep., vol. 5, p. 15833, Oct. 2015. [DOI:10.1038/srep15833]
29. [29] B. S. Yilbas, H. Ali, A. Al-Sharafi, and N. Al-Aqeeli, "Environmental mud adhesion on optical glass surface: Effect of mud drying temperature on surface properties," Sol. Energy, vol. 150, pp. 73-82, Jul. 2017. [DOI:10.1016/j.solener.2017.04.041]
30. [30] F. M. Zaihidee, S. Mekhilef, M. Seyedmahmoudian, and B. Horan, "Dust as an unalterable deteriorative factor affecting PV panel's efficiency: Why and how," Renew. Sustain. Energy Rev., vol. 65, pp. 1267-1278, Nov. 2016. [DOI:10.1016/j.rser.2016.06.068]
31. [31] H. Pang, J. Close, and K. Lam, "Study on Effect of Urban Pollution to Performance of Commercial Copper Indium Diselenide Modules," in 2006 IEEE 4th World Conference on Photovoltaic Energy Conference, 2006, vol. 2, no. 1977, pp. 2195-2198. [DOI:10.1109/WCPEC.2006.279943]
32. [32] E. Asl-Soleimani, S. Farhangi, and M. . Zabihi, "The effect of tilt angle, air pollution on performance of photovoltaic systems in Tehran," Renew. Energy, vol. 24, no. 3-4, pp. 459-468, Nov. 2001. [DOI:10.1016/S0960-1481(01)00029-5]
33. [33] H. R. Moutinho et al., "Adhesion mechanisms on solar glass: Effects of relative humidity, surface roughness, and particle shape and size," Sol. Energy Mater. Sol. Cells, vol. 172, no. February, pp. 145-153, Dec. 2017. [DOI:10.1016/j.solmat.2017.07.026]
34. [34] L. Boyle, H. Flinchpaugh, and M. P. Hannigan, "Natural soiling of photovoltaic cover plates and the impact on transmission," Renew. Energy, vol. 77, no. 1, pp. 166-173, May 2015. [DOI:10.1016/j.renene.2014.12.006]
35. [35] H. Jiang, L. Lu, and K. Sun, "Experimental investigation of the impact of airborne dust deposition on the performance of solar photovoltaic (PV) modules," Atmos. Environ., vol. 45, no. 25, pp. 4299-4304, Aug. 2011. [DOI:10.1016/j.atmosenv.2011.04.084]
36. [36] A. Ghosh and S. Neogi, "Impact of dust and other environmental factors on glass transmittance in warm and humid climatic zone," Clean Technol. Environ. Policy, vol. 19, no. 4, pp. 1215-1221, May 2017. [DOI:10.1007/s10098-016-1302-0]
37. [37] B. Hammad, M. Al-Abed, A. Al-Ghandoor, A. Al-Sardeah, and A. Al-Bashir, "Modeling and analysis of dust and temperature effects on photovoltaic systems' performance and optimal cleaning frequency: Jordan case study," Renew. Sustain. Energy Rev., vol. 82, no. April 2017, pp. 2218-2234, Feb. 2018. [DOI:10.1016/j.rser.2017.08.070]
38. [38] M. J. Adinoyi and S. A. M. M. Said, "Effect of dust accumulation on the power outputs of solar photovoltaic modules," Renew. Energy, vol. 60, pp. 633-636, Dec. 2013. [DOI:10.1016/j.renene.2013.06.014]
39. [39] S. A. M. Said, "Effects of dust accumulation on performances of thermal and photovoltaic flat-plate collectors," Appl. Energy, vol. 37, no. 1, pp. 73-84, Jan. 1990. [DOI:10.1016/0306-2619(90)90019-A]
40. [40] S. A. M. Said, N. Al-Aqeeli, and H. M. Walwil, "The potential of using textured and anti-reflective coated glasses in minimizing dust fouling," Sol. Energy, vol. 113, pp. 295-302, Mar. 2015. [DOI:10.1016/j.solener.2015.01.007]
41. [41] F. Touati, M. Al-Hitmi, and H. Bouchech, "Towards understanding the effects of climatic and environmental factors on solar PV performance in arid desert regions (Qatar) for various PV technologies," in 2012 First International Conference on Renewable Energies and Vehicular Technology, 2012, pp. 78-83. [DOI:10.1109/REVET.2012.6195252]
42. [42] E. Boykiw, "The effect of settling dust in the Arava Valley on the performance of solar photovoltaic panels. The Senior Thesis in Department of Environmental Science Allegheny College Meadville, Pennsylvania, USA, 36 pp.," 2011.
43. [43] E. Abdeen, E.-S. Hasaneen, and M. Orabi, "Real study for Photovoltaic system performance in desert environment - Upper Egypt - case study," in 2016 Eighteenth International Middle East Power Systems Conference (MEPCON), 2016, pp. 843-847. [DOI:10.1109/MEPCON.2016.7836993]
44. [44] H. K. Elminir, A. E. Ghitas, R. H. Hamid, F. El-Hussainy, M. M. Beheary, and K. M. Abdel-Moneim, "Effect of dust on the transparent cover of solar collectors," Energy Convers. Manag., vol. 47, no. 18-19, pp. 3192-3203, Nov. 2006. [DOI:10.1016/j.enconman.2006.02.014]
45. [45] B. M. A. Mohandes, L. El-Chaar, and L. A. Lamont, "Application study of 500 W photovoltaic (PV) system in the UAE," Appl. Sol. Energy, vol. 45, no. 4, pp. 242-247, Dec. 2009. [DOI:10.3103/S0003701X09040057]
46. [46] M. P. Rocha et al., "Comparative Analysis of the Dust Losses in Photovoltaic Modules With Different Cover Glasses," 23rd Eur. Photovolt. Sol. Energy Conf., no. September, pp. 2698-2700, 2008.
47. [47] J. R. Caron and B. Littmann, "Direct Monitoring of Energy Lost Due to Soiling on First Solar Modules in California," IEEE J. Photovoltaics, vol. 3, no. 1, pp. 336-340, Jan. 2013. [DOI:10.1109/JPHOTOV.2012.2216859]
48. [48] J. K. Kaldellis and A. Kokala, "Quantifying the decrease of the photovoltaic panels' energy yield due to phenomena of natural air pollution disposal," Energy, vol. 35, no. 12, pp. 4862-4869, Dec. 2010. [DOI:10.1016/j.energy.2010.09.002]
49. [49] A. A. Hegazy, "Effect of dust accumulation on solar transmittance through glass covers of plate-type collectors," Renew. Energy, vol. 22, no. 4, pp. 525-540, Apr. 2001. [DOI:10.1016/S0960-1481(00)00093-8]
50. [50] M. Abderrezek and M. Fathi, "Experimental study of the dust effect on photovoltaic panels' energy yield," Sol. Energy, vol. 142, no. July, pp. 308-320, Jan. 2017. [DOI:10.1016/j.solener.2016.12.040]
51. [51] M. Saidan, A. G. Albaali, E. Alasis, and J. K. Kaldellis, "Experimental study on the effect of dust deposition on solar photovoltaic panels in desert environment," Renew. Energy, vol. 92, pp. 499-505, Jul. 2016. [DOI:10.1016/j.renene.2016.02.031]
52. [52] M. R. Maghami, H. Hizam, C. Gomes, M. A. Radzi, M. I. Rezadad, and S. Hajighorbani, "Power loss due to soiling on solar panel: A review," Renew. Sustain. Energy Rev., vol. 59, pp. 1307-1316, Jun. 2016. [DOI:10.1016/j.rser.2016.01.044]
53. [53] D. S. Rajput and K. Sudhakar, "Effect of dust on the performance of solar PV panel," Int. J. ChemTech Res., 2013.
54. [54] J. K. Kaldellis, P. Fragos, and M. Kapsali, "Systematic experimental study of the pollution deposition impact on the energy yield of photovoltaic installations," Renew. Energy, vol. 36, no. 10, pp. 2717-2724, Oct. 2011. [DOI:10.1016/j.renene.2011.03.004]
55. [55] U. Mehmood, F. A. Al-Sulaiman, and B. S. Yilbas, "Characterization of dust collected from PV modules in the area of Dhahran, Kingdom of Saudi Arabia, and its impact on protective transparent covers for photovoltaic applications," Sol. Energy, vol. 141, pp. 203-209, Jan. 2017. [DOI:10.1016/j.solener.2016.11.051]
56. [56] B. R. Paudyal and S. R. Shakya, "Dust accumulation effects on efficiency of solar PV modules for off grid purpose: A case study of Kathmandu," Sol. Energy, vol. 135, pp. 103-110, Oct. 2016. [DOI:10.1016/j.solener.2016.05.046]
57. [57] E. S. Kumar, B. Sarkar, and D. K. Behera, "Soiling and Dust Impact on the Efficiency and the Maximum Power Point in the Photovoltaic Modules," Int. J. Eng. Res. Technol., vol. 2, no. 2, pp. 1-9, 2013.
58. [58] S. Ghazi and K. Ip, "The effect of weather conditions on the efficiency of PV panels in the southeast of UK," Renew. Energy, vol. 69, pp. 50-59, Sep. 2014. [DOI:10.1016/j.renene.2014.03.018]
59. [59] K. Brown, T. Narum, and N. Jing, "Soiling test methods and their use in predicting performance of photovoltaic modules in soiling environments," in 2012 38th IEEE Photovoltaic Specialists Conference, 2012, pp. 001881-001885. [DOI:10.1109/PVSC.2012.6317960]
60. [60] H. Pedersen, J. Strauss, and J. Selj, "Effect of Soiling on Photovoltaic Modules in Norway," Energy Procedia, vol. 92, no. 1876, pp. 585-589, Aug. 2016. [DOI:10.1016/j.egypro.2016.07.023]
61. [61] Y. Guan, H. Zhang, B. Xiao, Z. Zhou, and X. Yan, "In-situ investigation of the effect of dust deposition on the performance of polycrystalline silicon photovoltaic modules," Renew. Energy, vol. 101, pp. 1273-1284, Feb. 2017. [DOI:10.1016/j.renene.2016.10.009]
62. [62] A. Gholami, A. Saboonchi, and A. A. Alemrajabi, "Experimental study of factors affecting dust accumulation and their effects on the transmission coefficient of glass for solar applications," Renew. Energy, vol. 112, 2017. [DOI:10.1016/j.renene.2017.05.050]
63. [63] A. Rouholamini, H. Pourgharibshahi, R. Fadaeinedjad, and M. Abdolzadeh, "Temperature of a photovoltaic module under the influence of different environmental conditions - experimental investigation," Int. J. Ambient Energy, vol. 37, no. 3, pp. 266-272, May 2016. [DOI:10.1080/01430750.2014.952842]
64. [64] T. Zarei and M. Abdolzadeh, "Optical and thermal modeling of a dusty photovoltaic module ( in Persian )," in 1st International Conference on Mechanical and Areospace Engineering, 2016, no. April 2016.
65. [65] T. Zarei and M. Abdolzadeh, "Optical and thermal modeling of a tilted photovoltaic module with sand particles settled on its front surface," Energy, vol. 95, pp. 51-66, 2016. [DOI:10.1016/j.energy.2015.11.045]
66. [66] T. Zarei and M. Abdolzadeh, "Optical and Thermal Simulations of Photovoltaic Modules With and Without Sun Tracking System," J. Sol. Energy Eng., vol. 138, no. 1, p. 11001, 2016. [DOI:10.1115/1.4031684]
67. [67] J. Zang and Y. Wang, "Analysis of Computation Model of Particle Deposition on Transmittance for Photovoltaic Panels," Energy Procedia, vol. 12, pp. 554-559, 2011. [DOI:10.1016/j.egypro.2011.10.075]
68. [68] A. Y. Al-Hasan, "A new correlation for direct beam solar radiation received by photovoltaic panel with sand dust accumulated on its surface," Sol. Energy, vol. 63, no. 5, pp. 323-333, Nov. 1998. [DOI:10.1016/S0038-092X(98)00060-7]
69. [69] M. Abdolzadeh and T. Zarei, "Optical and thermal modeling of a photovoltaic module and experimental evaluation of the modeling performance," Environ. Prog. Sustain. Energy, vol. 36, no. 1, pp. 277-293, 2017. [DOI:10.1002/ep.12493]
70. [70] A. Rouholamini, H. Pourgharibshahi, R. Fadaeinedjad, and G. Moschopoulos, "Optimal tilt angle determination of photovoltaic panels and comparing of their mathematical model predictions to experimental data in Kerman," in Electrical and Computer Engineering (CCECE), 2013 26th Annual IEEE Canadian Conference on, 2013, pp. 1-4. [DOI:10.1109/CCECE.2013.6567674]
71. [71] P. Talebizadeh, M. A. Mehrabian, and M. Abdolzadeh, "Prediction of the optimum slope and surface azimuth angles using the genetic algorithm," Energy Build., vol. 43, no. 11, pp. 2998-3005, 2011. [DOI:10.1016/j.enbuild.2011.07.013]
72. [72] S. M. M. Modarres-Gheisari, R. Gavagsaz-Ghoachani, M. Malaki, P. Safarpour, and M. Zandi, "Ultrasonic nano-emulsification - A review," Ultrason. Sonochem., Nov. 2018. [DOI:10.1016/j.ultsonch.2018.11.005]
73. [73] A. Gholami, A. A. Alemrajabi, and A. Saboonchi, "Experimental study of self-cleaning property of titanium dioxide and nanospray coatings in solar applications," Sol. Energy, vol. 157, 2017. [DOI:10.1016/j.solener.2017.08.075]


XML   Persian Abstract   Print



Rights and permissions
Creative Commons License This work is licensed under a Creative Commons Attribution-NonCommercial 4.0 International License.
Volume 8, Issue 1 (9-2019) Back to browse issues page